IC COMPARATOR 10NS HI-SPD 8-SOIC
| Part Number | LT1016CS8#MPBF |
| Date Code | 2037 |
| Quantity Available | 17169 pcs |
| Manufacturer | Linear Technology/Analog Devices |
| Lead Time | Ship within 24 hours |
| QTY | 2500 |
| Datasheet | LT1016.pdf |
| Minimum Quantity | More than 50pcs |
| Distributor | SingSun |
| RoHS Status | Lead free / RoHS Compliant |
| Ship From | Hong Kong |
| Shipment Way | EMS/SF/DHL/TNT/UPS/FedEx |
| Country of Assembly | SOUTH KOREA |
| Country of Diffusion | UNITED STATES |
| Lot Number | BP48455.95 |
| MSL | 3 |
| Packaging | Reel |
| Base Product Number | LT1016 |
| Series | UltraFast |
| Type | with Latch |
| Number of Elements | 1 |
| Output Type | CMOS, Complementary, TTL |
| Voltage - Supply, Single/Dual (±) | - |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| Current - Output (Typ) | 20mA |
| Current - Quiescent (Max) | 35mA |
| CMRR, PSRR (Typ) | 96dB CMRR, 75dB PSRR |
| Propagation Delay (Max) | 14ns |
| Hysteresis | - |
| Operating Temperature | 0°C ~ 70°C |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Mounting Type | Surface Mount |
| Supplier Device Package | 8-SOIC |
The LT1016CS8#MPBF is an UltraFast 10ns comparator that interfaces directly to TTL/CMOS logic while operating off either ±5V or single 5V supplies. Tight offset voltage specifications and high gain allow the LT1016CS8#MPBF to be used in precision applications. Matched complementary outputs further extend the versatility of this comparator.
A unique output stage provides active drive in both directions for maximum speed into TTL/CMOS logic or passive loads, yet does not exhibit the large current spikes found in conventional output stages. This allows the LT1016 to remain stable with the outputs in the active region which, greatly reduces the problem of output “glitching” when the input signal is slow moving or is low level.
The LT1016CS8#MPBF has a LATCH pin which will retain input data at the outputs, when held high. Quiescent negative power supply current is only 3mA. This allows the negative supply pin to be driven from virtually any supply voltage with a simple resistive divider. Device performance is not affected by variations in negative supply voltage.
Analog Devices offers a wide range of comparators in addition to the LT1016 that address different applications.
